This file lists the changes in Cadcorp SIS · WebMap 9, using Web Map Layers 8.0.2580 as the reference.
June 2023
- References to Computer Aided Development Corporation Limited have been changed to Cadcorp Limited in the product credits.
May 2023
- The hosted URL shortener has been updated to work with all versions of WebMap 9.
April 2023
- FindIT queries could fail if run multiple times in the same session.
- A tag to support the dependent assembly required for OpenIDConnect support has been added to the web.config.
- On some non-English versions of Windows, the tile matrix for the Base Layer was added to the database with all values being zero.
March 2023
- Support for Google Analytics has been updated to use the GA4 protocol
- WebMap now allows the use of the Graph API for sending emails. SMTP is still supported through the legacy settings but also using MailKit.
- Consent tags have been added to Google analytics to prevent the use of cookies
- The following dependencies have been updated; jQuery to 3.6.4 and jQueryUi to 1.18.2
February 2023
January 2023
December 2022
- If Quick Search was disabled on a Map, then some functionality, including the Map Fader, would stop working.
November 2022
- On some non-English versions of Windows, the tile matrix for the Base Layer was added to the database with all values being zero.
September 2022
August 2022
July 2022
- If the first schema column in a FindIT overlay contained a NULL or empty value, the PDF export would fail.
- A reported reflected cross-site scripting vulnerability was resolved.
- Axios, jQuery and jQuery UI components have all been updated to address reported vulnerabilities.
-
June 2022
May 2022
April 2022
- When creating a new Map by copying, the available Maps are now listed alphabetically.
March 2022
- Certain configurations of the Local Knowledge DBResultsFirst column could cause an error.
February 2022
- When accessing the OGC services from GeognoSIS through the Cadcorp.OGC.CGI.exe using authentication, WebMap, as the IIS application must have basic authentication enabled.
- MapTips and filtering between elements is now working with polygons in the WebMap for Power BI visual.
January 2022
- Multiple WMS layers in WebMap Express, added using the Capabilities document, could not always be added to the Map.
- Three optional additional parameters can now be used to start WebMap:
opacity - sets the opacity of the current base layer
label - draws a label with the initial marker
labelocation - defines the position of the label
- Under some circumstances, printing Search By Area results would not include the Map Pins.
- Maps using the custom 277002020 EPSG code for OS Data Hub basemapping did not allow FindIT queries to be run.
- Support for polygons has been added to the WebMap for Power BI visual, allowing GeoJSON descriptions of the feature to be included in the source dataset for display over the map.
- A Refresh option has been added to WebMap for Power BI visual to allow dynamic datasets to be updated during the session.
December 2021
November 2021
- The definition for EPSG code 7856 was re-added to WebMap.
October 2021
September 2021
- New endpoints have been added to the Local Knowledge and Quick Search web services to return a list of available services. Use a post request with no body:
/quicksearch.asmx/GetSearches /br
/localknowledge.asmx/GetLocalKnowledge
- The localKnowledgeID and searchId (for Quick Search) values are now displayed in the WebMap Admin Interface.
- The Map name is now displayed in the browser tab
August 2021
- To ensure that all results are returned from the query in FindIT, the bounding box of the selected feature is used, rather than the current window.
- Multiple features can now be selected for query in FindIT.
- Dates could be initially displayed in a 'raw format'e.g. 2012-08-08T00:00:00Z.
July 2021
- In the Fire Query Tool, clicking on the Show More option when using Feature Information did not always display additional attributes.
- The copyright notice could appear as the Draw text under certain circumstances.
- The full date format in FindIT and WebMap now appear consistently as dd/mm/yyyy,hh:mm.
June 2021
- The WebMap and WebMap Express installers now allow the configuration of a network licence.
May 2021
- Oracle Table Views now appear in the list of available tables when setting up a database connection in the WebMap Admin Interface.
- Text in the Draw dialog now appears as the user types and can be edited after creation.
- When using Capture, data from OS Data Hub would not be displayed in the png output.
-
April 2021
- The selection tool in the Draw dialog did not always behave as expected.
- A new configuration property, LookUpRoleById, has been added to the identityConfig section of the web.config. By default, or if it is missing, the value is set to False and will return Group Names from Azure AD tenants, rather than the Group ID.
- The WebMap Mobile front page information dialog now automatically adapts to the size of the device screen.
- Changes to existing editable overlays in the WebMap Edit Add-in were not being picked up after a configuration has previously been made.
- If an attribute was editable and was both defined as Free Data Entry and Mandatory, it was possible to leave the data field blank.
March 2021
- The Edit Add-In did not write all attribute data to the database, despite indicating in the browser that it had.
- The Quick Search connection to the OS Places API now points to the OS Data Hub. Only API Keys created on the OS Data Hub, currently only for PSGA members) can now be used with this service.
February 2021
- The Edit Add-In did not write free text attribute data to the database, despite indicating in the browser that it had.
- The Fire Query Tool did not correctly format CSV output if there were existing commas in the database records.
- The ForwardGeocodeZoomResolution setting for what3words client configuration is now respected by the w3w WebMap Add-in.
January 2021
- The endpoint for the OS Names API has been updated to use the OS Data Hub directly.
- The Microsoft Access Database Engine 2010 (32-bit) Redistributable is now also installed on 64-bit version of WebMap.
December 2020
- The initial dialog URL parameter now works with the WebMap Mobile interface.
- The Map Feature dialog did not always display in the WebMap Mobile interface.
- GDA 94 Zone 56 (EPSG 28356) has been added to WebMap as a pre-defined Coordinate Reference System.
November 2020
- The Search button in FindIT now remains depressed while the search is running to avoid multiple button presses.
October 2020
- The version of jQuery used by WebMap has been updated to 3.5.1
- Under some circumstances, the GetFeatureInfo dialog would not appear when the map is clicked.
September 2020
- Some text changes have been made to the sample embedded maps page.
- An optional line has been added to the tag in the sample embedded map html page to provide jquery dependency.
- Under some circumstances, the EPSG code of the SWD was not being picked up by the embedded map to support feature info requests.
- FindIT now displays notification that the query is running by adding an animated circle.
- FintIT now displays notification that the PDF generation is running with the animated circle.
- The Generate PDF button in FindIT now displays as depressed after it has been used.
August 2020
- Some issues with Feature Info handling multiple pages of results have been resolved.
- The Submit button could be hidden on some mobile devices, according to screen size and operating system.
- Any groups containing WMS From Capabilities layers as part of an SWD are no longer automatically moved to the top of the overlays list in the Map Features dialog.
- The outcome of user and role harvest for Federated Security is now written to the error log.
- An error could prevent the config database upgrade script from running if the FirstMap or World map definitions had been removed from the Web Map Layers 8.0 config database.
- Hook points on drawn items now no longer disappear and can be interacted with regardless of the state of the Drawing Layer.
- The GeoJSON file created by the Drawing dialog now includes the CRS from the Map.
- The Edit Add-In now includes an Admin Interface.
- FindIT now provides an Admin Interface for the configuration of Map Searches and the overall Service.
- The zoom controls, layer switcher and key map styling have been updated in the embedded map.
- Some problematic WMS services were not being accepted by WebMap.
- The FindIT installer now populates configuration fields which include the GeognoSIS URL and the various other template file paths in the webMapLayersConfig.db.
- The version of jQuery has been updated to 3.4.1.
- FindIT has been updated to correctly display certain datatypes when they are returned using JSON.
- A number of usability changes have been made to the Search By Area functionality, to easily switch all layers on for a search and resetting layers back their original state after the search has been run.
- In FindIT, long copyright statements no longer remove the first header containing the layer name.
- The 'XML File Changes' for web.config were not applied in monthly builds for FindIT.
- The Map Fader option could disappear if WebMap was minimised from full screen.
- Opening WebMap with a decorated URL could sometimes display layers with null values for the layer name.
- The GeognoSIS URL dialog on the Manage Layers dialog now removes any trailing forward slash to avoid creating invalid requests.
- Saving annotations and loading them back into WebMap could sometimes fail.
- Some issues with interface translation have been resolved.
- The Select All check box is now turned off by default when a new map is created.
- The Cadcorp.Web.UI.FeatureInfo.ShowPopOut and Cadcorp.Web.UI.FeatureInfo.MobileShowPopOut settings to force the display of the full attribute dialog did not always work.
- Close button on the Power BI visual has been updated.
- Authentication credentials for layers are now included when a new map is created by copying an existing map.
- The datalayers parameter, when starting WebMap from a URL, can now be used in conjunction with a query on the URL. If the query parameters overlayname, schemacolumn & uid are present and datalayers are missing or is empty then the query is performed and all data layers are turned off. If there is a query on the url and datalayers is present, the query is performed and only layers specified by the datalayers parameter will be turned on. If there is no query, the datalayers parameter, as before, defines which layers are turned on as the map is started.
- The order of MapTips defined in the Power BI visual is now respected and can be changed during the session.
- The Power BI visual now reliably displays multiple features in a group, regardless of the zoom scale of the current view.
- Some layout adjustments have been made in FindIT to ensure that the buffer entry dialog is accessible at all times.
- Long overlay names are now correctly formatted when the layer switcher is enabled within the Power BI environment.
- When Cadcorp.Web.UI.FeatureInfo.ShowPopOut was set to false, datasets with a large number of schema items could be obscured in the dialog.
- The Layer Switcher in the Power BI and embedded maps now displays all layers from the GeognoSIS SWD and Base Maps.
- The embedded Quick Search can now search based on a single connection. The new parameters "searches", "osopenname" and "osplaces" can be used to define the Search ID that should be used by Quick Search.
- The WebMap Admin Interface now supports the use of commas as a decimal delimiter.
- More accessibility changes have been made to Notice Board, specifically to the embedded Quick Search.
July 2020
- A new key ProxyProtocolVersion has been added to the web.config to allow the administrator to define the version (1.0, 1.1 or 1.2) of HTTP being used.
- The Power BI visual now supports filtering from the map to other visuals.
- The WebMap Admin Interface now supports the use of commas as a decimal delimiter.
- The embedded Quick Search can now search based on a single connection. The new parameters "searches", "osopenname" and "osplaces" can be used to define the Search ID that should be used by Quick Search.
- More accessibility changes have been made to Notice Board, specifically to the embedded Quick Search.
- The Layer Switcher in the Power BI and embedded maps now displays all layers from the GeognoSIS SWD and Base Maps.
- When Cadcorp.Web.UI.FeatureInfo.ShowPopOut was set to false, datasets with a large number of schema items could be obscured in the dialog.
- Long overlay names are now correctly formatted when the layer switcher is enabled within the Power BI environment.
- Some layout adjustments have been made in FindIT to ensure that the buffer entry dialog is accessible at all times.
June 2020
- Long overlay names are now correctly formatted when the layer switcher is enabled within the Power BI environment.
- Formatting issues with FindIT results being obscured by the Show button have been resolved.
- Some layout adjustments have been made in FindIT to ensure that the buffer entry dialog is accessible at all times.
- More accessibility changes have been made to Notice Board, specifically to the embedded Quick Search.
- The Power BI visual now reliably displays multiple features in a group, regardless of the zoom scale of the current view.
- The order of MapTips defined in the Power BI visual is now respected and can be changed during the session.
- The WebMap sessions are now kept alive using a web worker. In addition, The Proxy Host field in the Admin Interface now requires a fully qualified URL to enable the Web Workerer to be correctly directed through the proxy.
- The Layer Switcher in the Power BI and embedded maps now displays all layers from the GeognoSIS SWD and Base Maps.
- The datalayers parameter, when starting WebMap from a URL, can now be used in conjunction with a query on the URL. If the query parameters overlayname, schemacolumn & uid are present and datalayers are missing or is empty then the query is performed and all data layers are turned off. If there is a query on the url and datalayers is present, the query is performed and only layers specified by the datalayers parameter will be turned on. If there is no query, the datalayers parameter, as before, defines which layers are turned on as the map is started.
- Authentication credentials for layers are now included when a new map is created by copying an existing map.
- Close button on the Power BI visual has been updated.
- Layer names in WebMap are now left aligned, specifically for when the layer name extends onto a second row of text.
- The Cadcorp.Web.UI.FeatureInfo.ShowPopOut and Cadcorp.Web.UI.FeatureInfo.MobileShowPopOut settings to force the display of the full attribute dialog did not always work.
- The embedded Quick Search can now search based on a single connection. The new parameters "searches", "osopenname" and "osplaces" can be used to define the Search ID that should be used by Quick Search.
- When Cadcorp.Web.UI.FeatureInfo.ShowPopOut was set to false, datasets with a large number of schema items could be obscured in the dialog.
- The Select All check box is now turned off by default when a new map is created.
May 2020
- The Select All check box is now turned off by default when a new map is created.
- Layer names in WebMap are now left aligned, specifically for when the layer name extends onto a second row of text.
- Close button on the Power BI visual has been updated.
- The WebMap sessions are now kept alive using a web worker.
April 2020
- The WebMap sessions are now kept alive using a web worker.
- It was not possible to change the tool tip text on the Quick Search clear button.
- Some issues with interface translation have been resolved.
- Saving annotations and loading them back into WebMap could sometimes fail.
April 2020
- The WebMap sessions are now kept alive using a web worker.
- It was not possible to change the tool tip text on the Quick Search clear button.
- Some issues with interface translation have been resolved.
- Saving annotations and loading them back into WebMap could sometimes fail.
April 2020
- It was not possible to change the tool tip text on the Quick Search clear button.
- Some issues with interface translation have been resolved.
- Saving annotations and loading them back into WebMap could sometimes fail.
March 2020
- An extra option called Allow Embedded Map has been added all Maps. This must be enabled if the map is to be used as an embedded map, including with Cadcorp SIS WebMap for Power BI.
- The WebMap Admin Interface now supports the use of commas as a decimal delimiter.
- Saving annotations and loading them back into WebMap could sometimes fail.
- The GeognoSIS URL dialog on the Manage Layers dialog now removes any trailing forward slash to avoid creating invalid requests.
- Opening WebMap with a decorated URL could sometimes display layers with null values for the layer name.
- Quick Search support has been added for the Aligned Assets SinglePoint (4.5.5.0 and above). Support for previous versions of SinglePoint is also maintained.
- It was not possible to change the tool tip text on the Quick Search clear button.
- Some issues with interface translation have been resolved.
- The Map Fader option could disappear if WebMap was minimised from full screen.
- The 'XML File Changes' for web.config were not applied in monthly builds for FindIT.
- In FindIT, long copyright statements no longer remove the first header containing the layer name.
- A number of usability changes have been made to the Search By Area functionality, to easily switch all layers on for a search and resetting layers back their original state after the search has been run.
- FindIT has been updated to correctly display certain datatypes when they are returned using JSON.
January 2020
- A Prompt$ added to the Print Template with the value Attribution will display the copyright statement for the current Base Mapping layer.
- An error could prevent the config database upgrade script from running if the FirstMap or World map definitions had been removed from the Web Map Layers 8.0 config database.
- Layer names in WebMap are now left aligned, specifically for when the layer name extends onto a second row of text.
- The outcome of user and role harvest for Federated Security is now written to the error log.
- Any groups containing WMS From Capabilities layers as part of an SWD are no longer automatically moved to the top of the overlays list in the Map Features dialog.
- The Draw dialog could fail the first time it was requested in WebMap Express.
- The Submit button could be hidden on some mobile devices, according to screen size and operating system.
- Noticeboard 9.0.1812 location tag refers to wmadm.aspx this should be nbadm.aspx.
Tags noticeboar.aspx, JavascriptHandler.axd or WebResource.axd location tags.
Location tags for noticeboar.aspx, JavascriptHandler.axd and WebResource.axd have been added to the Notice Board web.config while the correct tage has also been added for the admin page, nbadm.aspx.
- The version of jQuery has been updated to 3.4.1.
- The FindIT installer now populates configuration fields which include the GeognoSIS URL and the various other template file paths in the webMapLayersConfig.db.
- Some problematic WMS services were not being accepted by WebMap.
- FindIT now provides an Admin Interface for the configuration of Map Searches and the overall Service.
- Some issues with Feature Info handling multiple pages of results have been resolved.
January 2020
- A Prompt$ added to the Print Template with the value Attribution will display the copyright statement for the current Base Mapping layer.
- An error could prevent the config database upgrade script from running if the FirstMap or World map definitions had been removed from the Web Map Layers 8.0 config database.
- Layer names in WebMap are now left aligned, specifically for when the layer name extends onto a second row of text.
- The outcome of user and role harvest for Federated Security is now written to the error log.
- Any groups containing WMS From Capabilities layers as part of an SWD are no longer automatically moved to the top of the overlays list in the Map Features dialog.
- The Draw dialog could fail the first time it was requested in WebMap Express.
- The Submit button could be hidden on some mobile devices, according to screen size and operating system.
- Noticeboard 9.0.1812 location tag refers to wmadm.aspx this should be nbadm.aspx.
Tags noticeboar.aspx, JavascriptHandler.axd or WebResource.axd location tags.
Location tags for noticeboar.aspx, JavascriptHandler.axd and WebResource.axd have been added to the Notice Board web.config while the correct tage has also been added for the admin page, nbadm.aspx.
- The version of jQuery has been updated to 3.4.1.
- The FindIT installer now populates configuration fields which include the GeognoSIS URL and the various other template file paths in the webMapLayersConfig.db.
- Some problematic WMS services were not being accepted by WebMap.
- FindIT now provides an Admin Interface for the configuration of Map Searches and the overall Service.
- Some issues with Feature Info handling multiple pages of results have been resolved.
December 2019
- It is now possible to configure the resolution for the Zoom to Coordinates function, previously this used the current zoom resolution of the map.
- The Google+ button has been removed from the Share dialog.
- The sample embedded map page has been updated.
December 2019
- It is now possible to configure the resolution for the Zoom to Coordinates function, previously this used the current zoom resolution of the map.
- The Google+ button has been removed from the Share dialog.
- The sample embedded map page has been updated.
November 2019
- A new entry has been added to the webMapLayersConfig.db, Cadcorp.Web.UI.SBA.Precision, which can be used to round the coordinate points used define geometries in Search By Area. This dramatically reduces the size of the URL to fit in with .Net Framework restrictions.
- Certain characters used in a ReportIT email (apostrophe, hash and ampersand) could cause the entry to fail.
- After closing the Search By Area dialogs, overlays are reset the view state from when the dialog was opened.
- The information page, when enabled with the Mobile interface, could not be closed by the user.
August 2019
- In the WebMap Admin Interface resolutions are no longer automatically checked and updated every time the pages are opened. Instead, a new "Regenerate" button has been added to the Set Resolutions dialog which can be used to update the resolutions if a new base mapping cache is added or new resolutions are required.
July 2019
- In the WebMap Admin Interface resolutions are no longer automatically checked and updated every time the pages are opened. Instead, a new "Regenerate" button has been added to the Set Resolutions dialog which can be used to update the resolutions if a new base mapping cache is added or new resolutions are required.
- Search by Area results could still be visible after closure when using Capture.
- The Cadcorp.Web.UI.FeatureInfo.ShowPopOut and Cadcorp.Web.UI.FeatureInfo.MobileShowPopOut settings to force the display of the full attribute dialog did not always work.
June 2019
- If a Local Knowledge template had a NULL value in the HTML column, this could cause the config database to become locked.
- Support for the One Scotland Gazetteer has been added to the Quick Search.
May 2019
- Configuration of the default Identity Server installed with WebMap 9 has been updated to prevent some COR errors being reported by the browser.
- Searches could not always be removed from an existing map definition.
- Changes made manually to the SearchAdditionalResultsColumn table would be deleted when the Admin Interface is started.
April 2019
- The embedded Notice Board Quick Search could not be successfully added to other pages.
- Configuration of the default Identity Server installed with WebMap 9 has been updated to prevent some COR errors being reported by the browser.
- A problem with the Admin Interface was not allowing new maps to be created.
- Search by Area results could still be visible after closure when using Capture.
- The Edit Add-In did not always create the drawn feature or present the attribute dialog.
- SWDs which stored data in a local CRS and were then re-projected into specifically EPSG 3857 for use with Bing Maps, Open StreetMap or Google Maps in WebMap were not allowing features to be selected or included in Search By Area results.
- Under some circumstances, coordinates were displayed in degrees, not metres.
- The Select All toggle is now off by default when WebMap is started.
- When adding a GeognoSIS SWD in the WebMap Admin Interface, the URL hint still referenced an 8.0 URL.
- Under some circumstances, the Capture button needed to be clicked twice to work.
- When changing between transparent and opaque colours when using the Draw tools, the selected feature did not always respond.
- When using Search By Area, under some circumstances, the search overlays would not load the first time the dialog was opened.
- PDF output now includes a dynamic scale bar, as displayed on the print output.
- The info click on WMS layers would not always return the expected attributes.
- Drawing any annotation before opening the Print page could cause a rogue dialog to appear and prevent PDF creation.
March 2019
- The info click on WMS layers would not always return the expected attributes.
- When using Search By Area, under some circumstances, the search overlays would not load the first time the dialog was opened.
- PDF output now includes a dynamic scale bar, as displayed on the print output.
- Under some circumstances, coordinates were displayed in degrees, not metres.
- The text box in the A4 Landscape template was not properly centred and text inside the box was not extending to the internal edge.
- The ReadMe.txt file which explains running WebMap 9 on a different server to GeognoSIS has been updated.
- Templates of the CORs scripts have been added as Headers in the web.config for easier editing.
- When creating a new map from scratch, the Search By Area functionality did not always work.
- Trying to change the Zoom Resolution and or Icon under Manage Searches in the Admin Interface could result in a "Validation Failed" error on a freshly installed instance of WebMap.
- The copyright and the zoom controls in the IRS Link were overlapping.
- When changing between transparent and opaque colours when using the Draw tools, the selected feature did not always respond.
- When displaying a long list of layers in the Map Features dialog, the Select All button could become obscured.
- The Quick Search dialog and 'Clear' text on the Mobile interface have been correctly aligned when viewed on iphones.
- The Clear text next to Quick Search has been made larger.
- For differentiation, the Select drawing styles are now used for features created in the Search By Area.
- Removing columns from the Search By Area results table did not always work the second time that Search By Area was run within the same session.
February 2019
- When Search By Area results are filtered, the overall number of results is constantly displayed in the top banner, but the number of filtered results is also displayed as a summary.
- An error could prevent the config database upgrade script from running if the FirstMap or World map definitions had been removed from the Web Map Layers 8.0 config database.
- Editing vertices on a drawn feature when using FindIT could cause an error.
- The Template dialog in the Admin Interface did not display when using IE 11.
- The Template dialog in the Admin Interface did not display when using IE 11.
- The Edit Add-In did not always create the drawn feature or present the attribute dialog.
- For differentiation, the Select drawing styles are now used for features created in the Search By Area.
- Removing columns from the Search By Area results table did not always work the second time that Search By Area was run within the same session.
- Under some circumstances, the Capture button needed to be clicked twice to work.
- The Quick Search dialog and 'Clear' text on the Mobile interface have been correctly aligned when viewed on iphones.
January 2019
- The Clear text next to Quick Search has been made larger.
- When creating a new map from scratch, the Search By Area functionality did not always work.
- The text box in the A4 Landscape template was not properly centred and text inside the box was not extending to the internal edge.
- When displaying a long list of layers in the Map Features dialog, the Select All button could become obscured.
- When adding a GeognoSIS SWD in the WebMap Admin Interface, the URL hint still referenced an 8.0 URL.
- IRS Link web.config has been updated.
- An icon mismatch has been corrected in the IRSLink.
- The wrong css was included with the IRSLink.
- Some issues with the Admin Interface for the IRSLink have been resolved.
- When viewing results from Search By Area, the advanced search options for filtering the data did not always filter out the unnecessary rows.
- The Edit Add-In can now successfully be used with user added projections.
- When Search By Area results are filtered, the overall number of results is constantly displayed in the top banner, but the number of filtered results is also displayed as a summary.
- The Select All toggle is now off by default when WebMap is started.
- The Quick Search dialog and 'Clear' text on the Mobile interface have been correctly aligned when viewed on iphones.
- Upgrade scripts have been updated.
- Templates of the CORs scripts have been added as Headers in the web.config for easier editing.
- When turning grouped overlays on and off, WebMap did not always force a redraw of the map to display the changes in the map.
- When adding an OS Open Names search in the Admin Interface, the correct dialog did not always appear.
- Editing vertices on a drawn feature when using FindIT could cause an error.
- Licence feature for Fire Query Tool has been updated to GeognoSIS|Webmap|Add|FSQ
- CSS has been updated for the Fire Query Tool.
- Removing database connections from the Admin Interface didn't always reflect this.
- Some text updates have been made to the Fire Query Tool.
- SWDs which stored data in a local CRS and were then re-projected into specifically EPSG 3857 for use with Bing Maps, Open StreetMap or Google Maps in WebMap were not allowing features to be selected or included in Serach By Area results.
December 2018
- It is now possible to define either a single or double row to be specified for the attributes in the FindIT report.
- Hover over text has been added to the WebMap drop-down dialog.
- Additional logging has been added when harvesting users.
- The total page number has been added to the FindIT report.
- Some improvements have been made to the styling of the FindIT report.
November 2018
- A newly created Map is now automatically set to be the current Map to allow immediate configuration.
- It was not possible to copy the default FirstMap in the Admin Interface.
- Running a Quick Search immediately after Local Knowledge would cause the Local Knowledge query to run again.
October 2018
- The Admin Interface now features a link to the Administrators Online Help.
- It was possible for Measure tools to stay active under certain circumstances when the Draw dialog was opened.
- If no Quick Search is defined, the search is now terminated rather than leaving the results dialog endlessly searching.
- When creating consecutive Searches in the Admin Interface only the first Search was getting the mapID assigned in the config database.
- Selecting drawn text would change the selected text to say 'Sample Text'.
- Some issues with adding and deleting columns in the Manage Searches dialog have been resolved.
- Some page refreshes were required in the Admin Interface to see changes.
- The MapPinGeneric symbols are now included with WebMap for backwards compatibility.
- The OS Open Names API is now used as the default Quick Search in WebMap and WebMap Express.
- Point selection is now possible again using the drawn box.
- The Bounding Box defined for Search By Area queries now uses the extents of the search feature (for polygons) or the map window (for points).
- Configuration database updates now add the new Cadcorp.Security.ADUserContainer and Cadcorp.Security.ADGroupContainer settings.
- The Mobile interface now immediately prompts for a username and password if security is enabled.
- Unnecessary 'null' values have been removed from the Admin Interface.
- Geolocation failures are now handled with custom dialogs rather than relying on browser error dialogs.
- The Place Point command in the Mobile interface now works correctly.
- When using a single base map layer in the Mobile interface, this can now be toggled on and off in the Map Features dialog.
- Multiple lines entered in the notes field of print templates are now correctly formatted.
- The executionTimeout has been defined by default and set to 1800 seconds to allow for harvesting of large numbers of AD users and groups
- All new maps, not copied from an existing map, are now enabled with anonymous access by default.
- The initial information dialog is no longer enabled by default when creating a new map.
- After running a Search By Area, the search area could remain on screen and selected, even after the results are closed.
- Under some circumstances, after choosing the Select Feature option and clicking on the map, the Feature Info dialog would appear.
- A new Aerialphotography.png thumbnail image was included with WebMap.
- When creating a new map, an empty template of the same name was also being created.
- It was not possible to set a custom folder for the Stored Procedures during installation.
- It was not possible to preview any Search Configurations in the Admin Interface.
- The default icons used in the sample Local Knowledge were not included.
- The progress and back buttons in Search By Area did not always maintain the user's workflow.
- Search By Area did not always return the correct number of results.
- The new Zoom Resolution for Geolocation was not always being set or respected.
- When setting up a Quick Search in the Admin Interface all the column fields could appear red, as if incorrectly completed.
- Opening and closing the Add Search Dialog in the Admin Interface could cause additional Easting and Northing columns to be added.
- Some errors when upgrading a Web Map Layers 8.0 webMapLayersConfig.db for use with WebMap 9 have been resolved.
- A 404 error could be reported when trying to download CSV results from a Search By Area query.
- The WML::Knowledge_Filter$ was not allowing users to filter the results of a Local Knowledge Query.
- Trying to change the Zoom Resolution for a Quick Search could result in a Validation Failed error.
- Highlighted features in Search By Area results now use the Select Drawing Style definitions.
- The Cadcorp Web Mapping A3 Print Templates have been updated to correct minor layout errors and included in GeognoSIS 9 installation.
- The order of the Easting and Northing entry boxes has been swapped around when defining OS Open Names entry in the Admin Interface.
- The Download link now remains on the dialog after clicking on the Capture dialog.
- Searches for copy are now listed alphabetically.
- The totals displayed in the Search Results dialog were inconsistent when using the Show All Results option.
- It was possible to delete a ReportIT definition, even if it was defined as part of a map.
September 2018
- The Close All link on the Feature Info box is no longer displayed if only one feature is selected.
- The administrator can now define a view resolution that will be used when Geolocation is used to re-position the map.
- When the Map Features dialog was left open, the Bookmarks dialog could vanish.
- Long overlay names displayed on the Feature Info dialog can clash with the Close All link.
- Re-sizing the browser could cause dialogs to display behind, usually, the bottom banner.
- The Quick Search could return no results when used in the Mobile interface.
- Running Search By Area on multiple layers would not allow the user to select the individual results layers.
- The user could not always return to the map after creating a PDF.
- The Print Map button in the Search Results dialog did not include the intended search results.
- The new Capture functionality now allows the user to include drawn measure output.
- The new Capture functionality did not always work first time.
August 2018
- WebMap could stop working if no Report types were defined for ReportIT on a newly created map.
- The administrator can now set all PDF output to be layered by adding any valid delimited keys value pairs for the exportPDF API in Cadcorp.Web.UI.AdditionalPdfOptions. For example set LayerInfoAcrobat6=true to enable Layered PDF output.
- The status of snapping is now stored in a cookie between sessions.
- A Web Map Layers 8.0 webMapLayersConfig.db database was not always being upgraded when run against WebMap 9.
- The Edit Add-In now writes all features (attributes and geometry) to the database after the check for mandatory attributes has been run.
- Trying to change the Zoom Resolution and or Icon under Manage Searches in the Admin Interface could result in a "Validation Failed" error on a freshly installed instance of WebMap.
July 2018
- The option to extend the URL length for complex search queries, is now supplied, commented out, in the web.config.
- Deleting users in the Admin Interface now provides confirmation of the deletion.
- The results of AD user harvests are now written to the error log.
- The Icon tick box option in the Add Icon dialog is now on by default.
- Due to the introduction of item enumeration state caching by GeognoSIS, the paging behaviour of WebMap has been updated to become more reliable and faster.
- The Measure Tool was not always calculating the correct perimeter length.
- Legends are now placed correctly on PDF output and cannot be placed outside the map.
- A new logo is supplied with OS Base Mapping.
- New images have been added for deleting layers and bookmarks and for retrieving metadata.
- Tile resolutions are no longer rounded, which could cause loss of tiles when zooming in.
- Under some circumstances, using a buffer with Search By Area would return no results.
- The showsymbol=true parameter for embedded maps had stopped working.
- It is now possible to delete harvested groups in the Admin Interface.
- Multiple harvested users can now be deleted.
- The user can now close multiple attributes displayed in the Get Feature dialog with a single click.
- A number of references have been changed to support the change in name of the admin.aspx to wmadm.aspx.
- Connection to the OS Open Names API can now be configured through the Admin Interface.
- Use uploaded icons were not always being saved in the Admin Interface.
- Pressing Cancel during a Delete User operation in the Admin Interface would delete the user, but return an error.
- Editable hook points could sometimes disappear when drawing and editing on newly created maps
June 2018
- If all GeognoSIS layers in a Group have the WML::Ignore& property defined, the Group title will not be displayed in the Map Features dialog.
- ReportIT can now be configured differently against separate maps.
- Watermarks can now be added through the Admin Interface.
- When Search By Area results are filtered, the overall number of results is constantly displayed in the top banner, but the number of filtered results is also displayed as a summary.
- A number of missing resource browser console errors have been resolved.
- Tooltips have been added to the minimised search results.
- Searches on multiple layers now display the correct number of returned features for each layer.
- When querying a feature in the mobile site, the dialog that appears has a dropdown containing the layer name which could obscure the some of the attributes.
- The Quick Search on the Mobile Interface now matches the style of the desktop version and functions the same way too. The size of the popup can also be configured.
- The annotation layer can now be optionally displayed in the Map Features and turned on and off by the user.
- If the user resets their password using the emailed link, they are now redirected back to the login page.
- The DBSearch_Columns table now has as IsNumeric boolean column. If this is true the column is expected to be numeric, if false a string column is expected and the search has been changed to use the = operator, not like.
- Copyright information is now included on the capture functionality.
- Error message dialogs are now consistent.
- Back buttons have been added to the Search By Area dialogs
- The check boxes in the More Mapping dialog no longer get inadvertently checked when Select All is checked.
- The Users and Roles dialogs are renamed to Manage Users and Manage Roles respectively. They have both been updated to provide better access to the upload CSV functionality and a direct link to permissions for each user and role.
- Running the Search By Area query multiple times with a buffer enabled could cause the query to fail.
- The Capture dialog now uses styling consistent with other dialogs.
- The Capture option will now force the output image to be downloaded, regardless of the browser.
- The Capture Tool now allows the user to capture any measurement information as part of the image.
- Dialogs, particularly the Draw dialog, now will fit into a screen resolution of 768 pixels high without adding any scroll bars.
- Adding and removing icons in the Admin Interface now displays the relevant icons on the user interface dropdowns.
- New icons uploaded to the Admin Interface are now removed once the user moves from the upload dialog.
- The map controls could get shuffled out of order when a new map was created losing the context of the labels.
- Some typos on the Admin Interface have been resolved.
- The embedded map feature info popup contained an 'undefined string' in place of the 'Close All' text.
- Unnecessary scroll bars would be displayed when selecting features in the embedded maps.
- The default font style, now Google font Open Sans, wasn't being used for saved annotations.
- When larger images are used in WebMap as icons, the previews of images on the Draw dialog were not being sized to fit.
- Every user feedback message in the Admin Interface now appears in the same place and is not obscured by user scrolling.
- Hovering over the icon list on the Draw dialog, but not selecting could inadvertently present a different icon.
- When running Search By Area queries on multiple layers, switching between overlay results could display the wrong number of query results.
- A number of CSS related browser console errors have been resolved.
- New flaticon symbols have been added to WebMap 9. Corresponding SVG symbols have been included with GeognoSIS 9.
- The credits have been updated.
- The name of the Admin Pages for WebMap Express, WebMap and Notice Board have been changed to wmadm.aspx.
- A number of browser console errors have been resolved.
- The following CRS have been added to WebMap 9; 7856: GDA2020 / MGA zone 56 (Australia), 28992: Amersfoort / RD New (Netherlands), 31277: MGI / Balkans zone 7 (Serbia) and 32616: WGS 84 / UTM zone 16N (Mexico).
May 2018
- The delete red cross, used in Map Features and Bookmarks, has been replaced with a flat icon.
- The Draw dialog has been tidied up.
- The text dialog in the Draw Dialog allows text to be written over multiple lines.
- Updated A3 landscape and portrait print templates have been included with GeognoSIS.
- In Search by Area, selected features are now highlighted and multiple clicks are supported to allow selection of the correct feature.
- Under some circumstances, the embedded map would not recognise feature info.
- The Edit Add-In when used with SQL Server and PostGIS would not display the Name$.
- The map.aspx and admin.aspx pages now use the correct product name in the browser tab.
- All tick boxes and corresponding text are now correctly aligned.
- Search By Area results containing date fields can now be downloaded successfully to CSV.
- The action of the Spherical Mercator button, used when adding an OpenStreetMap layer, has been fixed and the Show Image Checkbox has been removed.
- The text labels on the Zoom to Coordinates dialog now change from Easting and Northing when the user selects Latitude/Longitude.
- The ReportIT option to add an image is now turned on by default in the Mobile interface.
- Scroll bars would always appear on the Map Features dialog in the Mobile interface, even when not required.
- The loading page for Web Map Layers Mobile still used Times New Roman for the "Loading" text.
- The 'Display Attributes After Creation' dialog was not working.
- User drawn annotations are now included in PDF output.
- User drawn annotations are now included in the new capture functionality.
- Pop ups enabled in the Mobile interface were incorrectly formatted.
- Additional map layers added by the user now only remain on the map which they were originally added.
- The config database update script for Web Map Layers 8.0 to WebMap 9 now included new ReportIT features.
- Some text has been shortened on the interface to make the button sizes more consistent.
- The Settings dialog has been tidied up.
- The Print page has been tidied up and now matches styles and fonts used elsewhere in the interface.
- The roles dialog has been updated to provide better access to the upload CSV functionality and a direct link to permissions for each role.
- The map controls could get shuffled out of order when a new map was created losing the context of the labels.
- New icons uploaded to the Admin Interface are now removed once the user moves from the upload dialog.
- Adding and removing icons in the Admin Interface now displays the relevant icons on the user interface dropdowns.
- Dialogs, particularly the Draw dialog, now will fit into a screen resolution of 768 pixels high without adding any scroll bars.
- The users dialog has been changed to Manage Users. The operations to load the CSV and add an individual user are now separated and the Show number entries option has been extended to include 500 and 1000 users. Against each user there is now a Permissions link that takes the administrator to the populated Manage User Permissions dialog.
- Error messages are now consistent.
- The Quick Search on the Mobile Interface now matches the style of the desktop version and functions the same way too. The size of the popup can also be configured.
- When querying a feature in the mobile site, the dialog that appears has a dropdown containing the layer name which could obscure the some of the attributes.
- Two new settings have been introduced into the general settings, Cadcorp.Security.ADUserContainer and Cadcorp.Security which handle the harvesting of a specific container within the Active Directory.
- The annotation layer can now be optionally displayed in the Map Features and turned on and off by the user.
April 2018
- Changing the Measuring Styles through the Admin Interface did not update the styles in the map.
- Long map names could cause the Admin Interface drop downs to display overlapped text.
- When editing the .resx file, the following can now be added without the need to escape; apostrophe ('), speech mark ("), greater than symbol (>). Ampersands (&) and less than symbols (<) still need escaping due to their function within XML.
- A Select All button has been added at the bottom of the Map Features dialog which will toggle all layers on or off, whilst respecting the current view of the layers.
- URL links stored as attributes now work correctly if they contain an equals sign.
- Going back to the Bookmarks dialog in the Admin Interface would not allow the user to edit the Bookmarks.
- The Submit button did not always work in the Admin Interface when trying to edit front page information.
- An additional button has been added to the WebMap desktop interface to allow the current map to be closed. The button will return the user to the default.aspx page.
- Some issues with shared Quick Search definitions used by different maps have been resolved. It is now possible to use the same Quick Search in more than one map by using the Copy an existing map to create it.
- The mapName Settings dialog now contains two dropdowns containing the full list of icons currently configured for the WebMap instance. One of these dropdowns controls the pin style for the Search By Area results while the other configures the Zoom To Coordinates pin style.
- The default.aspx page failed to show any potential maps for access, even when there are maps which can be accessed anonymously.
- The Map Opacity Control, Print, Settings and Help items are now included in the list of visible controls in the Admin Interface.
- Using Zoom to Selected option in the results table would zoom the user to 0,0.
- Only the first of multiple additional mapping layer was removed when "Clear all user defined layers" was ticked.
- The OS Places API can now be used in the Quick Search.
- Removing additional WMS layers could cause an error.
- The default map installed with WebMap 9, FirstMap, can now be deleted through the Admin Interface without further repercussions.
- The legend on the Print Preview map could disappear if it was moved.
- A number of Map Settings have been fixed including; other pages did not load when Main Menu control is on and all the other controls were switched off (Desktop and Mobile), the Print menu item did not take the user to the print template wizard unless either the Search, Local Knowledge Dialog or Report It Dialog map controls are checked and checking the Search By Area
- Dialog control would cause the map not to load unless the Report It Dialog control was also checked.
- Image capture now shows a loading animation, replaced by the dialog text and download link.
- Some of the images used by the embedded map samples were not included in the installer.
- The new Search by Area dialogs have been re-designed.
- The drop downs for WebMap 9 Desktop and Mobile interfaces have been standardised.
- The Admin Interface now allows the user to set the Point Radius to 0, previously only defining this value as 1.
- The Edit Add-In now defines attributes using the Schema Options Property in the SWD. The structure of the JSON has been updated to include which of the values is the default and whether it is mandatory to fill in the attribute.
- The Zoom to Coordinate dialog now allows entry using decimal numbers.
- Copying a map containing a Quick Search using OS Places would cause an error.
- The Zoom to Coordinates dialog will now accept either Coordinates and/or Latitude and Longitude inputs, regardless of the coordinate reference system used by the map.
March 2018
- The Google font Open Sans is now used throughout WebMap, WebMap Express and Notice Board 9.
- Viewing resolutions for maps using WMTS base mapping did not always display the resolutions defined by the service.
- Changing the units measurement did not always update the area value in the Measure dialog.
- The image download link dialog has been updated.
- The Cookies dialog has been updated to match other dialogs.
- Rogue watermarks could appear when an OGC layer, such as WMTS was added to a new map in WebMap 9.
- The Capture command did not work if there were no Base Layers defined in the SWD.
- The Select All feature in the Map Features dialog only worked once.
- Creating multiple slightly different PDFs did not always work.
- Clicking on the map when no data layers were turned on would cause the cursor to indicate that the map was unresponsive.
- Importing a CSV file of users or groups into Web Map Layers will now display a message of success and the full list of users and groups are also displayed in the Add Users Roles dialog.
- When using Zoom to Selected for a single feature in the Search By Area results dialog, the feature's geometry is now highlighted to show selection. When selecting multiple features, the chosen icon is used to show these multiple features. This is to avoid too many vectors being sent to the browser.
- Quick Searches defined for maps used by the Mobile interface could get replaced by the default Quick Search definition.
- Removing permissions from a group of users would cause a update failure.
- Quick Searches are now successfully replicated when the user creates a copy of an existing map.
- Opening the Measure dialog did not automatically select the tool for use.
- The Measure functionality could persist after the dialog had been closed.
- The Admin Interface now allows the user to set the Point Radius to 0, previously only defining this value as 1.
- The css and Script folders are now backed up after un-installation of Web Map Layers and Express.
- Data columns defined with the @variant type could cause a client error when the Show more.... link is used.
- The anchor point of text boxes in PDF output is now consistent with the anchor point used by user annotation text.
- The administrator can now add Additional WMS Map Layers.
- Attempting to remove view resolutions through the Admin Interface could cause the application to become unresponsive.
- When the More button was used with Quick Search results using OS Places API,the same results would be replicated.
February 2018
- Changing the Measuring Styles through the Admin Interface did not always update the styles in the map.
- Changes to the Default Draw Styles were not being displayed in the Draw dialog.
- Web Map Layers now includes support for Federated Security. Whilst still supporting Windows Authentication and Forms Security, additional security services such as Identity Server can now be used to authenticate users against a remote domain controller.
- The mapName Settings dialog now contains two dropdowns containing the full list of icons currently configured for the WebMap instance. One of these dropdowns controls the pin style for the Search By Area results while the other configures the Zoom To Coordinates pin style.
- The new Zoom to Coordinate dialog now includes the option to Show Location with an icon.
- There is a new Manage Users page when using Forms Authentication that allows the full display of a selected users editable information (username, email, account locked).
- Under some circumstances, the legend was not being included with the PDF export.
- If there is no feature at the point of a tap, the Desktop and Mobile sites will now no longer bring up a blank feature info dialog.
- The Quick Search dialog is now centered within the ribbon and has been made wider on the Mobile interface.
- When creating a new map and selecting 'Copy an existing map', the layers from the Manage Additional Layers now get copied across.
- A new Capture button has been added to the WebMap interface allowing the user to create a jpeg of the current map view, including annotations.
- Large numbers in Measure results box now under flow rather than over flow.
- Re-sizing text in the Draw dialog did not always work for all sizes.
- Usability of the Select All option on the Map Layers dialog has been improved when the More Mapping option is also present.
- The Quick Search results are now consistently displayed below the top ribbon in the centre of the screen.
- The ability to set group permissions for Windows Authentication security was broken.
- The Print, Mobile and Help menu items are now all clickable across their entire area, not just on the text itself.
- Changing line colour, fill colour or line style while drawing would still show the original styles on the preview.
- The legend on the Print Preview map could disappear if it was moved.
- Some text size discrepancies have been resolved.
- A rogue screen could appear when moving to and from the Print Preview screen.
January 2018
- There is now a sensible limit on maximum password attempts.
- ReportIT now records the time and date of a reported incident.
- Turning off the Print option in WebMap now ensures that the Print Map button in the Search By Area results is also removed.
- Changes to the Default Draw Styles were not being displayed in the Draw dialog.
- The display of attributes in the initial pop-out now uses relative widths to prevent unnecessary scroll bars appearing.
- The Map Opacity Control, Print, Settings and Help items are now included in the list of visible controls in the Admin Interface.
- The administrator can now add Additional WMS Map Layers.
- It is now possible to use alternative maps as the embedded map for setting Initial Location and Map Extents.
- Adding an invalid user will now return an error message explaining what the problem is.
- Custom icons can now be used as the default point style.
- Removing Users and Groups can now be successfully performed in the Admin Interface.
- The A3 print templates are now in the GeognoSIS 9 build, allowing printing in A3 size.
- On the Manage Searches page, aliases now persist when used for columns in a search.
- Using OpenIdConnect as the authentication method now includes a new 'Add user' page takes the place of the old 'Create user' page.
- The user now gets notified when an Active Directory user harvest concludes successfully, and the Harvest Users page gets automatically populated with the results.
- User annotations can now be edited after being saved and reloaded.
- Permissions management has now been made much simpler by allowing permissions to be unset. This now means that group permissions can take hold even after some permissions have been set for a user.
- Additional mapping layers are now being toggled on and off with the new Select All... button.
- Text created by the Draw dialog was always being drawn using the default colour and size.
- Some text on the installer was overlapping.
- Overlay names which included a backslash could not be edited with the Edit Add-In.
- A new applicationid value is now added to each map to prevent authentication failing when two maps on different instances are created.
- It was not always possible to log into the Mobile site using Forms Authentication.
- The Draw dialog Select option now acts as a toggle, alternating selection and de-select as the user selects.
December 2017
- Local Knowledge queries are now run in the order that the layers are stacked in the SWD, starting with the top layer/query.
- The anchor point of text boxes in PDF output is now consistent with the anchor point used by user annotation text.
- The front page now provides a Close button which will not appear to the user until they have scrolled through all the text in the panel.
- Front page information displayed when using the Admin Interface was sometimes incorrect.
- The name from the configuration database is now used as the tooltip when icons are offered for selection from the Draw dialog.
- An icon will now be displayed to show the user's current position when the Location button is used.
- When running an initial search in the Quick Search dialog, the focus remained in the results box.
- A new 'Remove all users' button has been added to the Manager Users dialog.
- If a dialog is already open when the user opens the More Info dialog, the original dialog is restored after the More Info dialog is closed.
- The WebMap installer now uses the correct icons, product names and default installation folders.
- When the More Info dialog is used, the layer name and number of results from that layer are now displayed at the bottom.
- Time limited licences can now be issued with WebMap.
- User created bookmarks could not be deleted.
- User annotations can now be deleted individually or using multiple selections.
- Local Knowledge queries would only run once and for the initial location.
- Some dialogs could be positioned behind the top and bottom banners.
- If the Print Templates used by WebMap did not include Scale and Created By prompts, the PDF creation would fail.
- Explanatory text has been added to the map opacity slider.
- The Get Feature command has been updated to use the new EPSG code definition.
- It was not always possible to add Bing Maps to a user created map.
- Using the Print button on the drop down menu did not always open the Print Page.
- The sample World Map was not correctly configured.
November 2017
- The product names have changed from version 8.0; Web Map Layers becomes Cadcorp SIS WebMap and Web Map Express becomes Cadcorp SIS WebMap Express.
- Changed default title to match new application names.
- All commands have been moved to the dropdown except Current Location, Home, Share and Bookmarks.
- The x has been removed from Quick Search and replaced with �Clear� text.
- Banner icons have been reduced in size and now include text.
- The zoom controls have been moved to the right to avoid being obscured by the dropdown.
- Updated the look and feel of the dialogs.
- Buttons all now have curved corners.
- Users can now save annotations . The map needs to be security to be enabled. The annotations are saved on the server as GeoJSON.
- Bookmark dialog is altered to more easily allow the creation and management of personal bookmarks.
- Support has been added to allow A3 Landscape and Portrait direct printing and PDF.
- Zoom to coordinates dialog is added. Currently, it only supports British National Grid.
- New WebMap 9 hexagon icons have been added.
- jQuery has been updated to 3.2.1.
- jQuery UI has been updated to 1.12.1. Supported browsers are all current versions of Chrome, Firefox, Safari, Opera, Edge and IE11.
- The solution has been updated to Visual Studio 2017.
- The .NET Framework has been update to .NET 4.6.1.
- WebMap Express has been updated to use new styles and images.
- Some modifications for Bookmark dialog enhancements.
- WebMap now supports printing and configuration of print templates using A3 landscape and portrait.
- The current membership provider has been removed and a new identity system added. This will allow the use of federated security and uses OpenID for authentication.
- The underlying version of Open Layers has been updated.
- Overlapping text in the Admin Interface has been resolved.
- Local Knowledge queries are now run in the order that the layers are stacked in the SWD, starting with the top layer/query.
- Turning off the Print option in WebMap now ensures that the Print Map button in the Search By Area results is also removed.
- Sample SWDs are updated for use with WebMap 9
- The security sign-in page is now presented to mobile users when enabled.
- The following licence features are now used: GeognoSIS|Webmap, GeognoSIS|Webmap|EXP, GeognoSIS|Webmap|QS, GeognoSIS|Webmap|Add|LK, GeognoSIS|Webmap|Add|RPT and GeognoSIS|Webmap|Add|EDT.
- Column names in the Admin Interface have been extended so that the whole name can be seen.
- The new Zoom to Coordinates dialog has been re-designed.
- A new image has been added to the Admin Interface.
- The new Clear text has been correctly aligned.
- The Quick Search dialog has been adjusted proportionally.
- If the main interface link to the cookies policy has been updated, the Cookies Policy link in the Settings dialog is now also updated.
- The styling of tables has been updated.
- A number of unnecessary files have been removed from the WebMap installer.
- A slider bar has been added to alter the transparency of the base mapping.
- Errors relating to user creation are now written to the errorlog folder.
- Text in the interface is now consistent in font and size.
- The following folders are now left after un-installation becasue they contain backup files: App_Data, App_GlobalResources and Mobile. The bin folder contains the licence file.
- The Save succeeded, and other notifications, now ensure that they don't disrupt the dialog.
- The Save button for annotations is now faded if user authentication is not set.
- The installer has been updated to take account of changes to GeognoSIS 9.
- The WebMap cursor will now change when moved over certain elements, specifically key map on/off buttons, zoom in/out buttons and map opacity slider.
- Local Knowledge search results are now displayed as they become available.